Model 180-CH-360

Tower Erection/Maintenance Hoist Model 180-CH-360

Features

* Meets OSHA requirements for personnel lifting (rear drum only)
Primary band brake with 3:1 safety factor
Secondary spring applied hydraulic release brake with 3:1 safety factor
Counter balance valve braking
4:1 safety factor where hoist is anchored to frame
Winch speed preselect @ 200, 100, and 50 fpm
Self-centering controls
Anti Two Block protection
Hour meter
5BC rated fire extinguisher
* Metering control valves
* Caterpillar 3056 DITA 180 HP diesel engine
* Engine preheater
* 100 gallon diesel fuel tank for more than 12 hours of operation
* Hydraulic oil heater for cold weather operation
* Optional 3rd drum
* Optional rear fleeting sheave package



Performance Specifications
For 1 inch wire rope

  Low Speed High Speed
  L.P. & L.S. L.P. & L.S.
Bare Drum 36,600 lbs. @ 100 fpm 14,128 lbs. @ 200 fpm
Average Drum 21,960 lbs. @ 167 fpm 8,477 lbs. @ 334 fpm
Full Drum 15,686 lbs. @ 233 fpm 6,055 lbs. @ 466 fpm

Approximate Weights
Without wire

Double Drum 25,000 lbs
Triple Drum 36,000 lbs

Storage Capacity

2,590 ft. of 1 inch wire rope
3,551 ft of 7/8 inch wire rope
4,757 ft of 3/4 ince wire rope


Meets or exceeds requirements set forth per OSHA Directive CPL 2-1.29.

   

Be Sociable, Share!
Website Design and SEO by: DDM Global